EN 1090 - Certificering van kwaliteitsauditors

Welding certification according to EN 1090

Certifications for steel and aluminum structures

Challenge:

As of summer 2014, the requirements for the manufacture of structures and structural steelwork specified in this standard will be mandatory for all manufacturers of steel and aluminum structures. This standard was originally intended to be introduced until 2012, but was postponed for a transitional period.

In addition, parts of the standard ISO 3834, EN 287 Welding tests and the availability of a welding supervisor as well as welding processes and corresponding welding power sources must be provided in addition, if you have not yet obtained them. In addition, several components must comply with an ISO 9001 and EN 3834 certification

We accompany you during the implementation of the EN 1090 certification

The best price for the complete processing of your Exec 2 process, which is the standard case with EN 1090, unless stated otherwise.
Design the process so that it can be introduced concomitantly in your process.
Employees who process the entire process, they go about their usual work.
We offer existing welding processes for machines of different types.
We have ready processes for MAG processes, currently only available from us. You do not have to reinvent the wheel.
The best offer for the EN 287 examinations and the accompaniment to obtain the certificates.
Offer to standardize the ISO 9001, ISO 140001, ISO 1090, EN 287 and OHSAS certification
Accompaniment to certification, and subsequent certifications

If a company supplies to the construction industry without a valid EN 1090, the building authority can have the component removed.
"Austrian Society for Welding Technology"

strekking

As part of the complete certification, we offer you the process by performing the following steps:

Preliminary talk at the company
Discussion of the procedure
Analysis of the existing special situation
Purchase personalized standards (can be purchased cheaply in Austria via the WKO, these are personalized)
Provisions of the Exec classes and declaration procedures.
Accompanying to the EN 287 Welding Certifications
Machine tests for compliance with the standard requirement
Reviews of the WPQR
Create internal documents (factory production control, ISO 9001 elements, optical control, tolerances, maintenance plans, test procedures and test instructions.
Support in the training or integration of welding supervision
Customize the production, workflow until the application of the CE mark
Coordination with the certification organization
Standards study
Factory set up, storage and marking of production machines, QM means and additives
Pre-audit
main audit
Follow-up audits

Proces

• Due to the ongoing consultations we offer you the certification as "payment by certificate". ie in case of success

• We are not advisors who redesign your company, but design the EN 1090 to be operational.

• You are the experts, we support and accompany you.

• We examine the current state and implement it in EN 1090

• We make sure that the processes can be integrated into your existing system

• For this we work with technology partners: welding machine manufacturers and the best certification bodies.

Voordelen

The certification according to EN 1090-1 gives you the following advantages.

• We are the only company currently offering a complete package at the best price.

• You get the welding processes for all your machines.

• Your products may be traded in the European Union

• They comply with legal requirements in the EU

• An entire European standard is introduced instead of many individual ones.

• You benefit from our know-how in terms of implementation.

requirments

The test and warning obligation states that a contractor has to check the documents provided to him for completeness and correctness, if he can.
It is therefore not an "EN 1090 duty", but the duty of the examination of foreign documents, plans, materials, etc. in the context of a construction work.
Due to the fact that it is a harmonized standard, EN 1090 is legally binding and of course has long been regarded as a "recognized rule of technology".

The duty to inspect and warn in Austria is a duty of contractors for construction works. The obligation laid down in ÖNORM B 2110 (General Contract Terms for Works - Contract Work Standard) means that an entrepreneur must review the execution documents, instructions, materials or inputs provided by the client. The customer must be informed in writing of any defects or expected damages. If the entrepreneur fulfills his test and warning obligation, and the client instructs the unaltered execution or does not make a decision, the entrepreneur is released from his liability and warranty in the corresponding case of damage.

Actueel Schweissen Nieuws

Bezoek aan Rosenbauer 11-22-2017 - Op 22 november 2017 bracht hij een bezoek aan het bedrijf Rosenbauer in...

Links

NL 1090 Digitale advertenties

Support

ondersteuning

U werkt in uw eigen tempo. U kunt uw projecten zelfstandig via ons portaal afhandelen en persoonlijke ondersteuning aanvragen. We hebben ons er daarom toe verbonden u de mogelijkheid te bieden uw eigen processen te ontwerpen, zonder dat u de ondersteuning via ons portaal hoeft op te geven.

Online beheer

Wij bieden u de mogelijkheid om uw certificeringstrajecten zelf uit te voeren, zonder dat u daarbij de expertise of ondersteuning van ervaren medewerkers hoeft in te leveren. Het online systeem is ontworpen voor diverse certificeringen en biedt u daarnaast FAQ-lijsten, kant-en-klare formulieren en tabellen, en een module om open vragen met een van onze medewerkers te bespreken.

Wijziging certificering

In onze snelle tijd zijn veranderingen in het bedrijfsleven een constante factor. Vaste structuren die vroeger jarenlang zijn opgebouwd, kunnen nu razendsnel worden doorbroken. Hiervoor zijn interne en externe redenen. De CS geeft een overzicht van de conformiteit tijdens veranderingen.

Samenwerking

Samenwerkingen

Omdat we allemaal maar beperkte tijd en financiële middelen hebben en de klant een complete service willen bieden, is samenwerking alleen zinvol tussen verwante organisaties. Deze hebben een betrouwbare structuur en een goede interpersoonlijke harmonie.

In 1090